Maxxis DHR 2 Double Down MaxxTerra

With a completely new profile design, the Minion DHR II is the ideal tyre for aggressive gravity driving. With the side lugs of the legendary DHF, which have been slightly widened for even better cornering support, it has extreme cornering support. The center lugs have beveled lugs for better acceleration. Notches on the lugs improve the transition when turning into corners. Part of the center knobs have a paddle shape, they dig in under hard braking and help keep the bike under control.

Wide Trail Casing (WT)
This special carcass construction optimizes the profile layout and tire shape on today's wider rims. Traditional tyres are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance. WT tyres are optimized for an internal rim width of between 30 and 40 mm.

Tubeless Ready (TR)
tube tyres have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of punctures is also reduced. MAXXIS TR tyres are better prepared for mounting with sealant than other "tubeless ready" tyres. The bead of our TR tyres is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid. "Normal" MAXXIS MTB tyres can also be mounted tubeless with sealant like tyres from other manufacturers, as the carcass fabric is very dense. However, only the new MAXXIS TR models are officially approved for tubeless installation and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.

3C MaxxTerra
The right 3C compound for Enduro and Freeride tyres. Ease of movement uphill and the best grip downhill characterize this mixture as well as a long service life.

double down
Doubledown tyres are constructed like downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. With two 120 TPI (instead of 60 TPI) carcass layers and an aramid bead, they are lighter than downhill tyres, significantly more stable and robust than TR + EXO tyres and therefore ideal for hard enduro courses.


Technical data:

Tire type: folding tyres 
intended use : MTB
Size (inches): 29 or 27.5 X 2.40
Design: Wide Trail Casing (WT), Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 2 x 120 TPI
tubeless capable: yes
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the front wheel
Recommended inner rim width: 19 - 35 mm width possible
Colour: Black

Weight according to the manufacturer: 1180g

Note: The weights of the tyres may vary due to production


Scope of delivery: 1x tyre MAXXIS Minion DHR II WT 3C MaxxTerra TR DoubleDown