Wear Set Sram GX Eagle 12 Speed Cassette 10-50 Teeth + Sram GX Eagle Chain Silver

Wear Set 12-speed Sram GX Eagle cartridge Full Pin XG-1275 10-50 teeth black + SRAM GX Eagle chain silver 

Cheaper than retail save and buy in a set! 

Cassette will be supplied without retail packaging (OEM)
SRAM GX Eagle 12-speed cassette

No matter whether it is a triple slope or the steepest ramps, the XG-1275 cassette provides the right gear with 10-50 teeth in every terrain. The stamped steel pinions and a 50-pinion pinion made of aluminum ensure a high durability of the cassette. The pinions are not connected via a spider, but are riveted with stainless steel pins. This makes the full-pin cartridge not only easier to handle compared to conventional cartridges, the open design also provides excellent self-cleaning in muddy conditions. The teeth optimized with SRAM's X-Glide 2 technology ensure optimal switching performance when switching up and down.


Technical specifications:

Material: steel, aluminum
Switching stages: 12
Gradation: 10-12-14-16-18-21-24-28-32-36-42-50
Compatibility Freewheel: SRAM XD
Technology: Full Pin, X-Glide 2
Color: Black

Weight: 450g (manufacturer's data)


SRAM GX Eagle 12-speed chain

The GX Eagle chain has been specially developed for the requirements of the 12-speed drive. Due to its unique design, the chain has a high wear resistance. A nickel coating provides a high corrosion resistance and reduces the friction of the chain. The revised PowerLock chain lock has a longer durability and is even easier to handle.


Technical specifications:

Material: steel
Cassette: 12-speed
Closure: PowerLock
Chain members: 126
Coating outer chain link: nickel
Coating inner chain links: black anodized
Color outer chain links: silver
Color inner chain links: black

Weight: 270g (manufacturer's specification)

1x SRAM GX Eagle 12-speed cassette | 10-50 teeth
1x SRAM GX Eagle 12-speed chain | 126 links
1x Power Lock chain lock

Hot tips: To help your new cassette last longer make sure to change out your chain to a new one when it reaches .75 wear on yours or our chain checker. We have well priced Cleanskin chain checkers avaliable to purchase.

Keep your drivetrain clean with either a dedicated bicycle drivetrain degreaser like Krush or Muc Off, a generic degreaser will do the job too just make sure to keep it away from your brakes!!

Before you rinse or get any water on the bike do your drivetrain degreasing first. Cover any braking surfaces with a clean rag then proceed to apply degreaser on all the chain, cassette and chainring just apply on the contact areas avoiding the bottom bracket as best you can.

Next step grab your brush, I personally use an old tooth brush dedicated to drivetrain cleaning which i apply degreaser to and start by cleaning the jockey wheels then scrubbing down all the cassette surface, chain and where the teeth contact the chain on the chainring. Rinse immediatly if it's a hot day and bam you should have a clean drivetrain, you can rinse down the rest of your bike and clean your pride and joy!!

Once the drivetrain is dry apply chain lube, I personally find 2 or 3 full rotations through from the quick link gives everything a good coating of lube, let it sit overnight or for a few hours (must do for wax based lubes) before your next ride to allow lube to get into all the chain pins properly. Wipe your chain off before your ride and now you're doing the best thing to prevent excess drivetrain wear.